document number: 28744 for technical questi ons, contact: ff3ares istors@vishay.com www.vishay.com revision: 09-aug-06 1 mcs 0402 vg01, mct 0603 vg01, mcu 0805 vg01 vishay beyschlag flat chip resistors with established reliability features ? approved according to en 140401-801, version e ? established reliability, failure rate level e6 ? advanced thin film technology ? advanced dissipation rating: 100 mw ? excellent overall stability: class 0.5 ? green product, supports lead (pb)-free soldering applications ? military ? avionics ? space metric size inch: 0402 0603 0805 metric: rr 1005m rr 1608m rr 2012m mcs 0402 vg01, mct 0603 vg01 and mcu 0805 vg01 thin film flat chip resistors wit h established reliability are the perfect choice for all high-reliability applications typically found in the fields of military, aircraft and spacecraft electronics. these versions supplement the families of professional and precision thin film flat chip resistors mcs 0204, mct 0603 and mcu 0805. note: the failure rate level e6 corresponds to mil level p. these resistors do not feature a limited li fetime when operated within the permissibl e limits. however, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the spec ific application, thereby es tablishing a functional lifeti me. technical specifications description mcs 0402 mct 0603 mcu 0805 cecc size, style rr 1005m rr 1608m rr 2012m resistance range 100 to 100 k 10 to 1 m 1 to1m resistance tolerance 1 %; 0.1 % temperature coefficient 50 ppm/k; 15 ppm/k climatic category (lct/uct/days) 55/125/56 55/125/56 55/125/56 rated dissipation, p 70 0.063 w 0.1 w 0.125 w operating voltage, u max ac/dc 50 v 75 v 150 v film temperature 125 c125 c125 c max. resistance change at p 70 for resistance range, r / r after: 100 to 100 k 10 to 1 m 1 to1m 1000 h 0.25 % 8000 h 0.5 % 225 000 h 1.5 % permissible voltage against ambient (insulation): 1 minute; u ins 75 v 100 v 200 v continuous 75 v 75 v 75 v failure rate level e6 failure rate 2 10 ? 9 /h 2 10 ? 9 /h 2 10 ? 9 /h e3 rohs compliant
mcs 0402 vg01, mct 0603 vg01, mcu 0805 vg01 vishay beyschlag flat chip resistors wit h established reliability www.vishay.com for technical questions , contact: ff3aresis tors@vishay.com document number: 28744 2 revision: 09-aug-06 note: we recommend that the clear text order ing code is used to minimize the pos sibility of errors in order handling. 1. availability in accordance to the table part numbers at the end of this datasheet. 2. jumpers are ordered by the resistance value 0 , e.g. mct 0603 vg01 p5 0r0. product description m c t 0603 -50 1 % vg01 p5 287 k film type product code size code imperial size temperature coefficient tolerance established reliability pac k ag i n g (1) resistance value m = metal c = flat chip s = 0402 t = 0603 u = 0805 0402 0603 0805 15 ppm/k 50 ppm/k 0.1 % 1 % reference to en 140401-801 version e p1 = 1000 units p5 = 5000 units e1 = 1000 units e0 = 10 000 units pw = 20 000 units see temperature coefficient and resistance range table en 140401-801 ordering information example of the ordering information for a resistor: mct 0603-50 1 % vg01 287k cecc40401-801ezrr1608mc287kfe6 example of the ordering information for jumpers: mct 0603 vg01 0r0 cecc40401-801ezrr1608m-0r00-e6 the elements used in this ordering information have the following meaning: cecc40401-801 ez rr1608m c 287k f e6 cecc detail specification number assessment level style (see table technical specification) temperature coefficient (c = 50 ppm/k; e = 15 ppm/k) resistance value according to en 60062, 4 characters tolerance on rated resistance (b = 0.1 %; f = 1 %) failure rate level according to en 60115-1, table zb.1 dimensions dimensions - chip resistor types, mass and relevant physical dimensions type h (mm) l (mm) w (mm) w t (mm) t 1 (mm) t 2 (mm) mass (mg) mcs 0402 0.32 0.05 1.0 0.05 0.5 0.05 > 75 % of w 0.2 + 0.1/- 0.15 0.2 0.1 0.6 mct 0603 0.45 + 0.1/- 0.05 1.55 0.05 0.85 0.1 > 75 % of w 0.3 + 0.15/- 0.2 0.3 + 0.15/- 0.2 1.9 mcu 0805 0.45 + 0.1/- 0.05 2.0 0.1 1.25 0.15 > 75 % of w 0.4 + 0.1/- 0.2 0.4 + 0.1/- 0.2 4.6 t 2 t 1 l h w w t
mcs 0402 vg01, mct 0603 vg01, mcu 0805 vg01 flat chip resistors with established reliability vishay beyschlag document number: 28744 for technical questi ons, contact: ff3ares istors@vishay.com www.vishay.com revision: 09-aug-06 3 description production is strictly controlle d and follows an extensive set of instructions established for reproducibility. a homogeneous film of metal alloy is deposited on a super high grade (96 % al 2 o 3 ) ceramic substrate and conditioned to achieve the desired temperature coefficient. specially designed inner contacts are deposited on both sides. a special laser is used to achieve the target value by smoothly cutting a meander groove in the resistive layer without damaging the ceramics. for the high ohmic range, optimized cermet products provide comparable properties. the resistor elements are covered by a protective coating designed for electrical, mechanical and climatic protection. the terminations receive a final pure tin on nickel plating. the result of the determined production is verified by an extensive testing procedure and optical inspection performed on 100 % of the individual chip resistors. only accepted products are laid directly into the paper tape in accordance with en 60286-3 . assembly the resistors are suitable for processing on automatic smd assembly systems. they are suitable for automatic soldering using wave, reflow or vapour phase as shown in iec 61760-1 . the encapsulation is resistant to all cleaning solvents commonly used in the electronics industry, including alcohols, esters and aqueous solutions. the resistors are rohs compliant, the pure tin plating provides compatibility with lead (pb)-free and lead-containing soldering processes. the immuni ty of the plating against tin whisker growth has been proven under extensive testing. all products comply with the gadsl 1) and the cefic- eeca-eicta 2) list of legal restrictions on hazardous substances. this includes full compliance with the following directives: ? 2000/53/ec end of vehicle life directive (elv) an annex ii (elv ii) ? 2002/95/ec restriction of the use of hazardous substances directive (rohs) ? 2002/96/ec waste electrical and electronic equipment directive (weee) solderability is specified fo r 2 years after production or requalification. the permitted storage time is 20 years. 1) global automotive declarable su bstance list, see www.gadsl.org 2) cefic (european chemical i ndustry council), eeca (european electronic component manufacturers association), eicta (european trade organisation repr esenting the information and communications technology and consumer electronics), see www.eicta.org -> issue -> environment policy -> chemicals -> chemicals fo r electronics approvals the resistors are tested in accordance with en 140401-801 (superseding cecc 40401-801 ) which refers to en 60115-1 and en 140400 . approval of conformity is indicated by the cecc logo on the package label. vishay beyschlag has achieved "approval of manufacturer" in accordance with en 100114-1 . the release certificate for "technology approval schedule" in accordance with cecc 240 001 based on en 100114-6 is granted for the vishay beysc hlag manufacturing process. specials this product family of thin film flat chip resistors with established reliability is complemented by zero ohm jumpers . functional performance further information on the performance of these products may be found in the following data sheets: ? ?professional chip resistors? document no. 28705 ? ?precision chip resistors? document no. 28700
mcs 0402 vg01, mct 0603 vg01, mcu 0805 vg01 vishay beyschlag flat chip resistors wit h established reliability www.vishay.com for technical questions , contact: ff3aresis tors@vishay.com document number: 28744 4 revision: 09-aug-06 note: resistance values to be selected for 1 % tolerance from e96 only and for 0.1 % tolerance from e192 only. temperature coefficient and resistance range description resistance value t.c. tolerance mcs 0402 mct 0603 mcu 0805 50 ppm/k 1 % 100 to 100 k 10 to 1 m 1 to 1 m 15 ppm/k 0.1 % 100 to 33 k 100 to 47.5 k 100 to 100 k jumper - 20 m ; i max = 0.63 a 20 m ; i max = 1 a 20 m ; i max = 1.5 a ordering information components may be ordered by using either the product description, the en 140401-801 ordering information or the part number. part number ? the resistors have a 12-digit ordering code starting with 2312. ? the subsequent 4 digits indicate the resistor type, specification and packaging; see the part number table. ? the remaining 4 digits indica te the resistance value: ? the first 3 digits indicate the resistance value. ? the last digit indicates the resistance decade in accordance with the resistance decade table. resistance decade ordering example the part number of a mct 0603 vg01 resistor, value 287 k and tc 50 with 1 % tolerance, supplied in cardboard tape of 5000 units per reel is: 2312 215 02874. resistance decade last digit 1 to 9.99 8 10 to 99.9 9 100 to 999 1 1 k to 9.99 k 2 10 k to 99.9 k 3 100 k to 999 k 4 1m 5 part number - resistor type and packaging description ordering code 2312 ... ..... cardboard tape on reel type tcr tol. e1 1000 units e0 10 000 units mcs 0402 50 ppm/k 1 % 260 0.... 275 0.... 15 ppm/k 0.1 % 262 0.... 277 0.... jumper - 262 90001 277 90001 type tcr tol. p1 1000 units p5 5000 units pw 20 000 units mct 0603 50 ppm/k 1 % 200 0.... 215 0.... 205 0.... 15 ppm/k 0.1 % 202 0.... 217 0.... - jumper - 202 90001 217 90001 207 90001 mcu 0805 50 ppm/k 1 % 240 0.... 255 0.... 245 0.... 15 ppm/k 0.1 % 242 0.... 257 0.... - jumper - 242 90001 257 90001 247 90001
legal disclaimer notice vishay document number: 91000 www.vishay.com revision: 08-apr-05 1 notice specifications of the products displayed herein are subjec t to change without notice. vishay intertechnology, inc., or anyone on its behalf, assume s no responsibility or liability fo r any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale.
|
